Sanyo Katana LX - Pairing Bluetooth Devices; Using the Trusted List Options

Pairing Bluetooth Devices
The Bluetooth pairing process allows you to establish
trusted connections between yourphone and another
Bluetooth device. When devices are paired, a passcode
(sometimes called a PIN) is shared between devices,
allowing for fast, secure connections while bypassing
the discovery and authentication process.
1. Press > Tools > Bluetooth.
2. Select an option and press .
n
Handsfree Pairing to find a headset or hands-free
device.
n
Add to Trusted to find a device per device type.
Select a device type to be searched.
n
Trusted List to find all device types. Select <Add New>
to start searching.
3. Select the device you wish to pair with and press .
4. Enterthe PIN and press . (When the owner of the
other device enters the same PIN, the pairing is
complete.)
5. Edit the device name and press .
Using the Trusted List Options
Once you have created paired devices, several options
are available from the Trusted List.
1. From the Trusted List, highlight a device.
2. Press Options (right softkey) to display the following
options:
n
Connect or Disconnect to connect to or disconnect
from the Bluetooth device (if applicable).
n
Send Item to send an item saved on your phone to
another Bluetooth device (if applicable).
n
Edit Name to edit the name of the trusted device.
n
Auto-Accept to configure your phone’s accessibility
to other Bluetooth devices. (See page 105.)
n
Device Info to display the trusted device’s
information.
n
Sort by to sort the trusted devices.
n
Delete to delete the selected device from the list.
n
Delete All to delete all devices from the list.
n
Settings to display the Bluetooth settings menu.
(See page 102.)
n
Help to display the Trusted List help.
104 Section 2J. Bluetooth