Sanyo Katana LX - Selecting Vibrate Types

Selecting RingerTypes for Messages
1. Press > Settings > Sounds > Ringer Type >
Messaging.
2. Select Text Message, Picture Mail, Voicemail, or
VoiceSMS.
3. Select an option and press .
4. Use your navigation key to scroll through the
available ringers. A sample ringer will sound as you
highlight each option.
5. Press to assign a ringer.
Selecting RingerTypes for Alarms or
Scheduled Events
1. Press > Settings > Sounds > Ringer Type.
2. Select Alarm or Schedule.
3. Select an option and press .
4. Use your navigation key to scroll through the
available ringers.
5. Press to assign a ringer.
Selecting RingerTypes for Power On or
Power Off Alerts
1. Press > Settings > Sounds > Ringer Type.
2. Select Power On or Power Off.
3. Select an option and press .
4. Use your navigation key to scroll through the
available ringers.
5. Press to assign a tone.
Selecting Vibrate Types
With this feature, you can select vibrate types for
incoming calls, messages, alarms, and scheduled
events.
1. Press > Settings > Sounds > Vibrate Type.
2. Select Incoming Calls, Messaging, Alarm, or Schedule.
n
Incoming Calls: select Default Vibrate or Unknown #s.
n
Messaging: select Text Message, Picture Mail,
Voicemail, or VoiceSMS.
3. Select a vibrate type and press .
Section 2B. Settings 33
Settings