To Next PageTo Next PageWhat to do if the power supply wiring is not correctly connected in Sanyo KS0951?
If your Sanyo Air Conditioner isn't getting power, the issue might be with the wiring. Ensure the power supply wires are properly connected to terminals No. 5 and No. 6 on the terminal plate located in the outdoor unit.
General| Brand | Sanyo |
|---|---|
| Model | KS0951 |
| Category | Air Conditioner |
| Language | English |
Guidance for safe electrical wiring procedures during installation.
Important considerations for installing the unit in various locations.
Detailed technical data for each air conditioner unit model.
Technical details of key internal components like motors and coils.
Physical measurements and dimensions for the indoor units.
Physical measurements and dimensions for the outdoor units.
Graphs showing operating characteristics based on temperatures.
Tables detailing cooling output under various conditions.
Summary of voltage, current, and power ratings.
Schematic diagrams illustrating the electrical connections within the units.
Guidelines for choosing the optimal location for indoor and outdoor units.
Instructions for mounting the remote control unit on a wall.
Explanation of how the unit regulates room temperature.
Details on the unit's humidity removal function.
Initial steps before diagnosing operational issues.
Troubleshooting steps when the unit fails to start.
Procedure for testing the electrical insulation integrity.
Guidelines for selecting a safe and appropriate installation site.
Step-by-step guide for basic manual control of the unit.
How to select and control fan speed, automatic or manual.
Instructions for cleaning the indoor unit's casing, grille, and filters.
Procedure for removing, cleaning, and replacing the anti-mold filter.
Tips to optimize performance and reduce energy consumption.
Common problems and their solutions for diagnosing issues.
