Sanyo LCD-24K40 - Volume Control

20
VOLUME
5
INFO
Press INFO button on Remote Control to display the status of LCD TV, the display will disappear after 5 seconds.
VOLUME CONTROL
To adjust the volume value desired by pressing VOLUME(+/-)
buttons on Remote Control or on Side Control. The volume
dialogue box will appear on the screen for a short while.
VOLUME(+) button to increase volume, and VOLUME(-)
button to decrease volume.
STEREO/MONO
MUTE
Should you wish to mute the sound, press MUTE button.
To switch the sound back on, press MUTE button again
or press VOLUME(+/-) buttons on Side Control or on
Remote Control.
11
AUTO
D/K
MONO
Colour System
Sound System
Channel
Stereo/Mono
BASIC OPERATION
REMOTE CONTROL
VOLUME(+/-)
buttons
REMOTE CONTROL
INFO button
REMOTE CONTROL
MUTE button
REMOTE CONTROL
VA·B button
SOUND MODE
STANDARD
NEWS
MUSIC
PERSONAL
Select sound level by pressing SOUND button on Remote
Control.
STANDARD
Normal sound state preset on LCD TV.
Select this mode for talk programs.
Select this mode for music programs.
Select this mode for user to call out the preset sound
adjustment in SOUND menu.
NEWS
MUSIC
PERSONAL
REMOTE CONTROL
SOUND button
LCD-19K40(R-S-W)ENG.indd 20LCD-19K40(R-S-W)ENG.indd 20 4/13/2010 1:36:06 PM4/13/2010 1:36:06 PM
Press the A·B button on Remote Control to show the
information display. And then press A·B button to select
the following audio signals: "STEREO", "MONO", "NICAM",
"A" and "B".