9
4-2.2. In factory mode OSD menu, select “Cool” item, press “OK” key to enter the item.
R, G, B drive values are set for Warm, Medium, and Cool independently.
4-2.3. S˸ʳ˖˿ʳ˧˸˸˴˸ʳ˹ʳϘ˪˴ϙʿʳϘˠ˸˷˼ϙʳ˴˷ʳϘ˖˿ϙʳ˼˻ʳ˹˿˿˼˺ʳ˸˶ʳ˴˵˿˸ˁ
Color temperature(for 26",32",42")
Color Temp. Cool Medium Warm
x 0.267 0.281 0.301
y 0.271 0.288 0.310
Tolerance ± 0.003 ± 0.003 ± 0.003
Color temperature(for 19")
Color Temp. Cool Medium Warm
x 0.291 0.300 0.314
y 0.300 0.310 0.323
Tolerance ± 0.003 ± 0.003 ± 0.003
If the x and y value are larger than specification,
Decrease Green drive from default value.
Increase Blue drive from default value.
If the x or y or both x and y value is/are smaller than specification.
Decrease Blue drive from default value
According to a x and y value, please following adjustment of 1 or 2.
1 If x value is higher than spec
Increase Green drive from default value.
Increase Blue drive from default value.
2 If y value is higher than spec,
Decrease Green drive from default value
To Next Page
Loading...
