8
4-1.3. Change Astro859 Timing to No.933 (1080i) and keep pattern on 924(color bar).
Repeat step 4-1.2 to do source calibration,
4-1.4. Change input source to PC.
Change Astro859 Timing to No.953 (640x480@60Hz) and keep pattern on 924(color bar).
Repeat step 4-1.2 to do source calibration,
4-2. Color Temperature Adjustment & Check
4-2.1. Set input source to Video1.
Set the signal generator Astro-859 timing to PG2-924(NTSC 480i@60Hz).
Set Astro-859 pattern to PG2-999, Level: 0.7V (100%), press Astro-859 “FORMAT” key and key, then
adjust RGB value to R:204, G:204, B:204
To Next Page
Loading...
