Sanyo MCD-Z100F User Manual

I
PAUSE MODE
&
9
@i
l@’
1. Press the PLAY/PAUSE button during play. Play
➤/11
will temporarily stop, and the CD PLAY indicator
will flash.
2. Press the PLAY/PAUSE button again to resume
play. The CD PLAY indicator will remain ON.
TRACK SEARCH
1. In the play mode, press and hold down the l<<
5KIPSEARCH
or ➤>1 SKIP/SEARCH button to lower the vol-
%
ume level and quickly advance or return to any
ml
part of the disc. The TRACK NO. display will
9
flash.
M
2. Release the l<< or ➤Fl SKIP/SEARCH button to
,,, /
. ... .
return the volume to normal level and resume
,.
‘$
,’
;:
play.
. . .
NOTE:
If the l<< or ➤>1 SKIP/SEARCH button is
pressed during the PAUSE mode, no sound will
be heard, and the PAUSE mode will continue
Press and hold down during playback.
when the button is released.
TRACK SKIP
SKI WSEARCH
%
1. Press and release the [<< or ➤Pl SKIP/
SEARCH button repeatedly during play to
quickly locate the beginning of a track.
Q
m
2. The TRACK NO. display will show the number of
,,, ,
the selected track. Play will continue from the
. ... .
. . . .
beginning of the new track.
,’
:,4
NOTE:
. . .
If the l<< or ➤El SKIP/SEARCH button is
pressed while the unit is in the PAUSE mode, the
unit will remain in the PAUSE mode when the
Press and release repeatedly.
button is released.
-6-

Sanyo MCD-Z100F Specifications

Power

ac_power_source	230-240 V, 50 Hz
dc_power_source	12 V (8 "D" size batteries)
output_power	3.0 W x 2 (DC max.)

Audio Specifications

frequency_response	80-12, 000 Hz (Normal tape)
s_n_ratio	70 dB
wow_flutter	undetectable

Radio Specifications

am_tuning_range	525-1710 kHz
fm_tuning_range	87.5-108 MHz
aerials	Built-in ferrite bar and telescopic rod aerials

CD Specifications

sampling_frequency	44.1 kHz
quantization	16 bits linear/ch
pick_up_wave_length	790 nm

Weight and Dimensions

dimensions	460x155x250 mm
weight	3.2 kg