LISTENING TO TAPES
PLAYBACK
32
1. Set the FUNCTION switch to TAPE.
- ‘TAPE appears on the display.
FUNCTION
2. Press the STOP/EJECT button and insert a cassette
into the cassette lid with the tape side facing out.
Close the cassette lid.
3.
STOP/EJECT
v
8:
Press the PLAY button.
PLAY
&
b
4. Adjust the VOLUME control as desired.
vCWME
Q
.
0.
.
.
.
.
MN ●
5. Select the BASS XPANDER and TONE settings as
desired.
@
TE
.*
.
.
●
.
LOW.
HIGH
6. Press the STOP/EJECT button to stop playback at any
time. When the end of the tape is reached, the tape will
stop automatically.
STOP/EJEST
%
■ :
Pause
Press the PAUSE button to temporarily stop the tape during
playback or recording, Press it again to continue.
Fast Forward and Rewind
Press the FFWD or REW button to quickly wind the tape
forward or backward. Press the STOP/EJECT button to
stop the tape.
When the end of the tape is reached, the tape will stop, and
the FFWD or REW button will be released automatically.
Full automatic stop
This unit has a full-release stop system, to protect the tape
and prevent pinch roller damage. When the end of the tape
is reached in Playback, Recording, Fast forward or Rewind,
the tape mechanism will stop automatically.
HELPFUL HINTS
Safeguards against accidental erasure
Whenever a recording is made, the sound previously
recorded is automatically erased. To protect valuable re-
cordings from accidental erasure, the unit and cassette are
equipped with standard safety features. To keep recorded
material permanently, break out the tab(s) on the back of
the cassette with a screwdriver.
To protect side A, break out tab(l ). To protect side B, break
out tab(2).
NOTE:
A cassette with the erase guard tabs removed cannot
be erased or used for recording and the REC button
cannot be depressed. To record or erase a protected
cassette, cover the tab openings with adhesive tape
(3).
-13-
To Next Page
Loading...
