Need help?Do you have a question about the Sanyo MDF-436 and is the answer not in the manual?
General| Brand | Sanyo |
|---|---|
| Model | MDF-436 |
| Category | Freezer |
| Type | Upright Freezer |
| Weight | 120 kg |
| Power Supply | 220V, 50Hz |
| Refrigerant | R404A |
| Number of Doors | 1 |
| Defrosting | Manual |
| Alarm System | Yes |
| Shelves | 4 |
Explains warning, caution, and prohibition symbols used in the manual.
Covers critical warnings for installation, usage, and prohibited actions.
Details handling, electrical safety, and general usage cautions.
Provides advice on alarm behavior, temperature readings, and frost management.
Lists altitude, temperature, humidity, and power requirements for safe operation.
Shows a diagram labeling key external and internal components of the freezer.
Details the function of each labeled component.
Describes the operations of the control panel buttons and indicators.
Specifies conditions for choosing a suitable location for the freezer.
Details the steps for positioning, leveling, and grounding the unit.
Guides the installation of an optional temperature recorder.
Provides steps for powering on and preparing the freezer for use.
Explains the terminal for remote alarm notification and its contact capacity.
Details how to set the desired internal temperature of the freezer.
Explains how to enable and disable the keypad lock feature.
Describes how to adjust the high and low temperature alarm thresholds.
Lists various alarms, their causes, indications, and corresponding safety operations.
Explains how to set the auto-resume time for alarms.
Provides steps for cleaning the exterior and interior of the unit.
Details the steps for defrosting the freezer chamber.
Addresses issues like poor cooling, noise, and setting problems.
Advises on safe practices for disposing of the unit to prevent accidents.
Lists detailed technical data including dimensions, capacity, and electrical ratings.
Presents performance data like cooling temperature range and noise level.
A form for assessing contamination and safety before servicing.
To Next Page
