Need help?Do you have a question about the Sanyo MDF-U32V and is the answer not in the manual?
General| Brand | Sanyo |
|---|---|
| Model | MDF-U32V |
| Category | Freezer |
| Voltage | 220-240V |
| Frequency | 50/60 Hz |
| Type | Upright Freezer |
Explains warning/caution signs, symbols, high voltage, and CO2 gas hazards.
Covers safe installation locations, humidity, ventilation, and gas hazards.
Details safety during operation, maintenance, power failure, storage, and disposal.
Provides guidance on door handling, frostbite, filter cleaning, and moving the unit.
Guidance for first start-up, battery status, and warning device checks.
Explains how ambient temperature affects the unit and cooling performance.
Safe door handling, frost removal, and recommended cleaning methods.
Details necessary power outlet, breaker capacity, and dedicated power source.
Specifies conditions like altitude, temperature, humidity, and voltage for operation.
Illustrates and labels the main parts of the freezer unit.
Details about the outer door, handle, gasket, access ports, and inner door.
Information on casters, leveling feet, and the unit's lock mechanism.
Explanation of the control panel layout, indicators, and button operations.
Guidelines for choosing an appropriate installation location.
Requirements for floor stability, humidity levels, and avoiding hazardous gases.
Steps for removing packaging, cleaning, and adjusting leveling feet.
Procedure for fixing the unit to the wall and ensuring proper electrical grounding.
Procedure for attaching the optional automatic temperature recorder.
Instructions for operating the optional CO2 back-up system.
Guidance on adjusting the optional inventory rack shelves.
Step-by-step guide for connecting power and initial unit activation.
Procedures for setting the desired temperature and testing the alarm system.
Detailed procedure for adjusting the main chamber temperature setting.
Instructions for configuring the high and low temperature alarm thresholds.
Table outlining various alarms, their situations, indications, and safety operations.
Procedure for setting the time before the alarm buzzer reactivates.
Description of the remote alarm terminal and its contact output.
Explanation of status monitoring, S codes, and the running status table.
Procedure for changing the delay time for compressor start-up after power failure.
Steps for cleaning the freezer's exterior and interior.
Instructions for cleaning the condenser filter to ensure optimal performance.
Procedure for safely removing frost buildup from the chamber walls.
Troubleshooting common problems related to cooling performance.
Diagnosing and resolving alarm activation and unusual noise problems.
Troubleshooting for the optional back-up system's operation.
Guidelines for safe handling and disposal of the unit at the end of its life.
Information on locating and safely removing the unit's rechargeable battery.
Detailed technical specifications of the ultra-low temperature freezer.
Details on cooling performance, temperature range, power source, and noise levels.
A checklist for service personnel regarding unit contents and safety.
To Next Page
