EasyManua.ls Logo

Sanyo MDF-U5386S User Manual

Sanyo MDF-U5386S
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
38
Instruction manual
xThis section is extracted and printed from Instruction Manual.
xIf you find out “Refer to page
ƔƔ” in them, this page means not page in service manual
but page in the lower corner of each page in the extract from Instruction manual.
This page number is not corresponded with serial number in Service manual.

Other manuals for Sanyo MDF-U5386S

Question and Answer IconNeed help?

Do you have a question about the Sanyo MDF-U5386S and is the answer not in the manual?

Sanyo MDF-U5386S Specifications

General IconGeneral
BrandSanyo
ModelMDF-U5386S
CategoryFreezer
TypeUpright Freezer
Temperature Range-50°C to -86°C
Weight240 kg
Voltage220-240 V
Frequency50/60 Hz
Number of Doors1
RefrigerantHFC
Alarm SystemYes
Defrost SystemManual
Energy Star RatedNo
Capacity538 liters
Dimensions (H x W x D)1990 x 770 x 870 mm
Dimensions (W x D x H)890 x 790 x 1930 mm

Summary

INTRODUCTION

PRECAUTIONS FOR SAFE OPERATION

FREEZER COMPONENTS

Outer door

Description of the outer door, handle, and latch mechanism.

Door latch

Instruction to always lock the latch when the outer door is closed.

Magnetic door gasket

Provides a tight door seal and prevents cold air leak. Keep clean.

Access port (rear and bottom)

Used for leading cables and sensors into the chamber.

Inner door

Operation of the inner door to minimize temperature rise; removable for cleaning.

Lock

Mechanism for securely locking the outer door with a key.

Control panel

Used for temperature setting and displaying operating status.

Caster

Provides mobility; leveling feet adjust contact with the floor.

INSTALLATION SITE

INSTALLATION

Ground (earth)

Use a grounded power outlet to prevent electric shock.

START-UP OF UNIT

TEMPERATURE SETTING

Chamber temperature

Procedure for setting the desired chamber temperature.

ALARM TEMPERATURE SETTING

ALARMS & SAFETY FUNCTIONS

ROUTINE MAINTENANCE

Defrosting of inside wall

Procedure for removing frost buildup from the freezer's interior.

TROUBLE SHOOTING

The chamber is not cooled at all

Checks for issues when the chamber is not cooling.

The cooling is poor

Checks for issues when the cooling performance is inadequate.

REPLACEMENT OF BATTERY

OPTIONAL COMPONENTS

Inventory rack

Details on the optional inventory rack for storing materials effectively.

SPECIFICATIONS

PERFORMANCE

Related product manuals