Sanyo MDF-U5386SC User Manual

38
Instruction manual
xThis section is extracted and printed from Instruction Manual.
xIf you find out “Refer to page
ƔƔ” in them, this page means not page in service manual
but page in the lower corner of each page in the extract from Instruction manual.
This page number is not corresponded with serial number in Service manual.

Sanyo MDF-U5386SC Specifications

General

Brand	Sanyo
Model	MDF-U5386SC
Category	Freezer
Language	English

Summary

Introduction

Safety Precautions

Warning and Caution Symbols

Explains the meaning of WARNING and CAUTION signs used in the manual.

Environmental Operating Conditions

Freezer Components

Component Identification and Descriptions

Detailed list and explanation of the freezer's various parts.

Control Panel and Keypad Functions

Description of the control panel layout, buttons, and indicator lamps.

Installation Site Requirements

Unit Installation Procedure

Unit Start-Up Guide

Temperature Settings

Chamber Temperature Adjustment

Step-by-step guide to setting the desired chamber temperature.

Key Lock Functionality

How to enable or disable the keypad lock feature.

Alarm Temperature Configuration

Alarms and Safety Features

Alarm Resume Time Setting

Remote Alarm Connectivity

Compressor Delay Time Adjustment

Routine Maintenance

Cabinet Cleaning and Care

Instructions for cleaning the exterior and interior of the freezer cabinet.

Condenser Filter Maintenance

Guide on how to clean the condenser filter for optimal performance.

Defrosting Inside Walls

Procedure for removing frost buildup from the freezer chamber.

Troubleshooting Common Issues

Battery Replacement Guide

Unit Disposal and Recycling

Temperature Recorder Installation

Back-Up System Operation

Optional Components

Inventory Rack Installation

Instructions for installing and adjusting the optional inventory rack.

Freezer Specifications

Freezer Performance Data

Safety Check Sheet