Sanyo MDF-U32V User Manual

21
REMOTE ALARM TERMINAL
The terminal of the remote alarm is installed at the lower left side of the unit. The alarm is outputted
from this terminal. Contact capacity is DC 30V, 2 A.
Contact output:
between COM. and N.O. between COM. and N.C.
At normal Open Close
At abnormal Close Open
Note:
The alarm is actuated when the power cord is disconnected from the outlet or the power switch is OFF.
REMOTE ALARM
N.O. COM N.C.
MAX DC30V 2A

Sanyo MDF-U32V Specifications

General

Brand	Sanyo
Model	MDF-U32V
Category	Freezer
Language	English