NAME AND FUNCTION OF PARTS
O Shade
To protect the fluorescent lamp.
O Door
The door opens to 130°. When
closed, the door forms a perfect
seal with the aid of magnet gas-
ket.
0 Door switch
To stop the chilled air circula-
tion fan when the door isopened
so that the outflow of chilled air
is minimized.
O Observation window
A 3-ply heat ray absorbing glass
panel which arrests incoming
heat rays
(MIR-153 and 253 only)
The cabinet interior can be
screened from light if the glass
protection plate is substituted
for one of black.
(MIR-553 only)
The window incorporates a
small door, sealed with magnet
gasket, which screens the inside
of the cabinet from light.
0 Shelves
The shelves can be adjusted
vertically.
O Lock
To lock, this should be turned
180° counterclockwise.
O Adjustable legs
To secure the unit in place, turn
the legs counterclockwise until
the unit rests securely on the
floor.
O Evaporation tray
To catch melt water from auto-
matic defrosting and to allow it
to evaporate.
0 Look-in window
To check the frost condition of
the cooler.
MIR-153
©Switch box
©Control panel
©Air circulating
hole
© Shelves -
©Access hole"
©Look-in -
window
©Drain hole-
-OShade
©Do
-©Observation
window
-©Glass
protection
plate
-©Lock
©Adjustable legs
©Evaporation tray
" ©Door switch
MIR-253
©Switch box.
©Air circulating
hole ~
©Control panel
© Shelves -
©Access hole
©Look-in —
window
©Drain hole •
© Casters -
OShade
'©Door
©Observation
window
©Glass
protection
plate
-©Lock
©Door switch
©Adjustable legs
©Evaporation tray
-6-
Downloaded from https://www.rsmanuals.com
To Next Page
Loading...
