Sanyo MLS-3781L - Troubleshooting; Stand-by Not Displayed

12.Troubleshooting
is not when the is turned ON.
Checking point by
tea .. ,
Check the conductivity
F ....
• od<el of
housing set
(1) main power billa •.
If the breaker Is OFF, tum nON.
(2) Check the power cord for any breakage.
If broken, replace the power cord.
(1) i the P0'NW5Upply.
Tum OFF the main power supply and turn ON the power
switch of the unit, and check the conductivity.
If not conductive, replace tha power switch.
(2) Check the lead wire for removal or looseness.
ENTERA (or CE).
;
Check tha lead wire for breakaga .
- 35-