Sanyo MLS-3781L - Abnormal Temp. Bottom Thermistor (TH3); Handle Lock Unlockable (E6)

(11) Abnonnal teQJerature of the bottom thennlstor (TH3) (E5 occurs.)
1 Check the heBlin water amount in the chamb... If the heati water In the chamber is d .... Bled, re enish it
2 Check. the nem of "steam leaks from I e and oint." Re Ir the steam leakl rl
., .... +- SolenoId
Between White 2 and 3
connection.
Housing set DS
Detection switch
Conductivity checking
posilions
• DetecUon switch 1
Between White 2
.oo 3
* Wire Nos. are
indicated on the
connectors.
I
(1) Check connector insertion of the housing set X+ U(3751)
or D + T(3781). If not completely Inserted, correct n.
(2) Check the resistance value between the terminals of the
solenoid.
Range
of resistance value: 160 - 1852
In cue of short-an::uit or breakage, replace the solenoid.
(3) Check. If the lock pin Is caught. Apply grease.
incomplete
short-circuited with
housing
set DS.
lever
being retumed, replace the
- 41 -