Sanyo MLS-3781L - Dismounting the Side Panel and Back-Side Panel; Dismounting the PC-Board Assembly for Control

(I) Dlsmol6ltln. the ct-ah valve auentlly
(Flg •. -7 end-8)
(]) Disconnect the connectors connected to the
drain valve
aaembly.
® I...oOIIIIn the hose band end disconnect it.
<3l Remove the orifice 1.8 joint.
® Dismount the solenoid vai'M set together with
the T chamber joinL
(I) Dlsmol6ltlnc the .. athad hntar
<D Tum the tube counl8rclockMae to move it.
® Remove the ~r winsa, loosen the mounting
nutl end dismount the healer from the
chember. (See Flgs.-9 and -10.)
(7) Dlsmol6ltln. the lateral thennlrior (TH1)(Fig.-11)
<D L.ooNn the thermistor mounting BCI'8WI and dismount
the
thermistor end rubber ring.
(I) Dlsmol6ltln. the bottom thannlrior (THS)(Fig.-12)
<D I...oOIIIIn the thermistor mounting nuls and di.mount
the
thermistor end rubber ring.
(I) Dlsmol6ltlnc the SV camp. valve ... .,-DIy (FIg.-13) ~ ~ §:
<D Loosen the mounting nut to dismount the SV compo
valva assembly.
- 46-
; I