Sanyo MLS-3781L - Page 49

(15) Dismounting the fan motor (Fig.-21)
CD Remove the power supply connectors which are connected.
(2) Remove the 2 motor mounting screws.
(16) Dismounting the chllJTi)er cover plate
(Figs.-22 and -23)
CD Remove the 12 cover chamber lid mounting screws.
(2 screws are found at the back side.)
(17) Dismounting the ..,e.ke. (Figs.-24 and -25)
<D Remove the 1 speaker cover plate mounting
screw.
(%) Remove the plastic lugs and dismount the
speaker.
(18) Dlsmountlna: the top plate
CD Remove the 6 mounting screws at the back side.
(Fig.-26)
(%) Remove the 4 screws at the both sides. (Fig.-27)
(19) Dlsmountlna: the operation body
CD Remove the 6 handle cover mounting
screws. (Fig.-28)
(%) Remove the 2 mounting screws at the
back side. (Fig.-28)
(The mounting screw at the right side
is tightened together with the speaker.)
@ Remove the 3 mounting screws at the
top plate side. (Fig.-29)
@ Since the wires are connected, tum
them over on the top plate.
@ Remove the connectors which are
connected.
Screw
* If the body is opened with the wires being connected to it.
wires of the speaker. etc. may be broken. Pay attention to the
- 48-
screw position.