NVM-4070 Portable Navigation System 12 Chapter 2 Getting Started
Contents Index
Chapter 2 Getting Started
This chapter describes the hardware interface of the SANYO NVM-4070 and
its peripherals. Instructions for setting up the device and some basic system
operations are also discussed.
2.1 Hardware Overview
This section introduces the NVM-4070 external features and hardware compo-
nents.
2.1.1 Packing List
The SANYO NVM-4070 box contains all of the items listed below:
• NVM-4070 Portable Navigation System
• Dashboard Mounting Disc
• Windshield & Dashboard Car Mounting kit
• Car Power Adaptor
• AC Power Adaptor
• USB cable
• Quick Start Guide
• CD Instruction Manual
•Warranty
• DVD Map Software
• TMC antenna unit
2.1.2 External Features
Figure 1: Front Panel View
NOTE: Although the NVM-4070 rechargeable Li-ion battery comes approxi-
mately 40-80% charged, before using, it is best to connect the AC adaptor and
plug to power socket and fully charge the battery. The ON/OFF button will
glow orange when charging.
Table 1: Front panel controls
No. Function Description
1 Power / Menu button
Normal ON/OFF power button and change menu
2 Microphone Microphone (directional Microphone)
3 LED Glows blue when Bluetooth connected
4 Speaker Speaker
NOTE: Power / Menu button : Press the button for long interval as Normal
ON/OFF power button.
Press and hold the button for 2 seconds to turn
power off.
While unit power is on, press and immediately
release the button to display Main Menu.
2 3
1
4
To Next Page
Loading...