NVM-4070 Portable Navigation System 26 Chapter 4 Communications
Contents Index
4. The mobile phone will often require you to enter a password to connect the
device. Enter “0000” on the mobile phone in this case.
5. When the connection completes, the screen returns to the “Communica-
tions” screen. The name of the connected phone is displayed on the title
bar. And the Bluetooth icon changes to green.
4.1.2 Mobile Phone Connection (Reconnect)
1. Set Bluetooth to “ON” on the “Settings”, and tap the “Connection” button
of the “Communications” screen. The mobile phones that have connected
in the past displays on the “Paired list” .
2. Select one of the mobile phones and tap the “Connect”.
3. The mobile phone will often require you to enter a password to connect the
device. Enter “0000” on the mobile phone in this case.
4. When the connection completes, the screen returns to the “Communica-
tions” screen. The name of the connected phone is displayed on the title
bar. And the Bluetooth icon changes to green.
NOTE: If the connected mobile phone has the Bluetooth auto-accept function,
set this function to “ON”.
(For more detailed information, see your phone’s manual.)
To Next Page
Loading...