Sanyo NVM-4070 - Chapter 4 Communications; 4.1 Connection

NVM-4070 Portable Navigation System 25 Chapter 4 Communications
Contents Index
Chapter 4 Communications
“Communications” provides the various functions with the Bluetooth mobile
phone.
“Communications” main menu is as follows:
4.1 Connection
4.1.1 Mobile Phone Connection (New)
1. Set Bluetooth to “ON” in the “Settings”, and tap the “Connection” button
of the “Communications” screen.
2. Tap the “Search” button. NVM-4070 starts to search available mobile
phones.
3. The available phones are displayed on the phone list. Select one of the
mobile phones and tap the “Connect” button.
No. Description
1 The name of the connected mobile phone
2
Bluetooth Status
: Bluetooth is “ON”.
Mobile phone is not connected.
: Mobile phone is connected.
21
NOTE: Make sure the Bluetooth settings of your mobile phone.
- The Bluetooth switch is set to “ON” or “enable”.
- The visibility is set to “Discoverable”, “Show my phone”.
(For more detailed information, see your phone’s manual.)