Sanyo RM5008 - Adjustment of Tuner; Dial Cord Stringing

ADJUSTMENT OF TUNER
Europe, U.K. Set the DC12V, Speaker Impedance is 32 ohms. Standard output: 50mvV (1.26V)
AM Band Input (Test Point) Output (Test Point)
: 460kHz (Europe)
LF Speaker Terminals 470kHz (U.K.) T303
eee eel
osc
ma
=
SG Frequency
> z
=
Ss bove Same as above OOK HE py
‘THIGH Serer ae 1400kHz VCT-3
Repeat adjustment 2, 3, 4 and 5.
145kHz
T60ktH2
Repeat adjustment 2, 3, 4 and 5.
| Step | FM Band Input (Test Point) Output (Test Point) SG Frequency | Adjustment | Note |
- IC101 1 pin(H) | 1C301 11 pin(H) | 407 aa T301 ae
: a TP2LE) & 7302 (E) : ae el
87.4+0.1—0.15 MHz
3 LOW (Europe, L/Europe) L104
87 MHz (U.K.)
Bee 108.5 40.3 MHz
(Europe, L/Europe) VCT-2
109 MHz (U.K.)
LOW
|
9OMHz
|
L103
Har
Benen
[mame
pt
Repeat adjustment 3, 4, 5 and 6.
TP1 (H) & Speaker terminals
* For V curve adjustment, deviate the T302 in pulling out direction, and adjust with T301.
DIAL CORD STRINGING
— rt
27029 mm