10
3. OPERATION OF WIRELESS REMOTE CONTROL UNIT
3.3 General Operation
Press the setting buttons as described below and change the settings as desired.
STEP 1 To start the air conditioner, press the ON/OFF operation button.
STEP 2 Press the MODE selector button and select the desired mode.
For DRY operation
For COOLING operation
For FAN only operation
For AUTO operation
For HEATING operation
STEP 3 Press the TEMP. setting buttons to change the temperature setting to the
desired temperature.
Adjustable temperature range:
30°C (86°F) max.—16°C (61°F) min.
In “AUTO” mode, the temperature cannot be adjusted.
In “HEAT” mode, the initial value is 28°C (82°F).
In other operation, the initial value is to 25°C (77°F).
STEP 4 Set the FAN SPEED selector button to the desired setting.
AUTO : Auto fan speed.
: Low fan speed.
: Middle fan speed.
: High fan speed.
In Dry mode, the fan speed is automatically set to LOW.
STEP 5
Press the button and set the air-blow direction, as desired or
automatically.
T
o STOP the air conditioner, press the ON/OFF operation button again.
STEP 2
STEP 5
STEP 1
STEP 3
STEP 4
NOTE
NOTE
(** Only for Heatpump models **)
(** Only for Heatpump models **)
To Next Page
Loading...
Need help?
General
