Sanyo SAP-KRV9AG User Manual

8
3. OPERATION OF WIRELESS REMOTE CONTROL UNIT
3.2 Remote Control Unit Functions
Transmitter When you press the buttons on the remote control unit, the mark
appears in the display to transmit the setting changes to the receiver in the
air conditioner.
Display Information on the operating conditions is displayed while the remote control
unit is turned on. If the unit is turned o, only the current time and the
operation mode temperature that has been set are displayed.
ON/OFF operation button This button is for turning the air conditioner ON and OFF.
MODE selector button To select “AUTO” “COOL”
“DRY” “FAN” or “HEAT” mode.
(AUTO) : In this setting, the air conditioner calculates the dierence between the
thermostat setting and the room temperature and automatically
switches to appropriate running mode.
(COOL) : The air conditioner makes the room cooler.
(DRY) : The air conditioner reduces the humidity in the room.
(FAN) : The air conditioner runs the indoor fan only.
(HEAT) : The air conditioner makes the room warmer.
(** only for Heatpump models **)
(+) / (-) setting buttons : Press the (+) button
to increase the set temp
erature; continue pressing
for two seconds to quickly increase the set temperature.
: Press the (-)
button to reduce the set temperature; continue pressing
for two seconds to quickly reduce the set temperature.
LOCK / UNLOCK button : Simultaneously press the b button to lock or unlock the wireless
remote control unit.
TIMER ON button ON : The air conditioner starts at the set time.
TIMER OFF button OFF : The air conditioner stops at the set time.
Signal Transmitter
MODE selector button
SWING button
TIMER ON button
TIMER OFF button
LIGHT button
Display
TEMP button
ON/OFF operation button
TEMP. setting button
FAN SPEED Selector button
CLOCK button
BLOW button
TURBO button
SLEEP button
OPER
+
+
OI-183-8-EG

Sanyo SAP-KRV9AG Specifications

General

Brand	Sanyo
Model	SAP-KRV9AG
Category	Air Conditioner
Language	English