Sanyo SPW-C0905DXHN8 - Schedule Timer and Air Conditioner Operation

3-79
1
2
3
4
5
6
7
8
Control of W-2WAY ECO-i SYSTEM
5. Schedule Timer
Schedule Timer and Air Conditioner Operation
Air conditioners operate either according to operations programmed from the schedule timer (starting/stopping and remote con-
trol operation enable/disable) or according to a connected remote controller or system controller.
Schedule timer settings (Example)
*1
*2
8:00 12:00 17:00 20:0013:00 18:00
Stopped Stopped
Running Running
Enabled EnabledDisabled Disabled
*3
Stopped
*1
8:00 12:00 17:00 20:0013:00 18:00
Stopped StoppedStoppedRunning Running
EnabledEnabledEnabled
Disabled
Operation from the system controller
[Stop + RC operation disable]
[Stop + RC operation enable]
Disabled Disabled
Operation without system controller operation
If remote controller operation is enabled, the air conditioner can be started/stopped from the remote controller.
(The air conditioner responds to the most recently pressed button.)
*1 Whether remote controller operation is enabled or disabled depends on the setting of the
previous day.
*2 Since remote controller operation is disabled, operation remains disabled.
*3 The remote controller remains disabled the next day and thereafter until it is enabled in the
remote controller operation enable/disable setting.
Operation with system controller operation
If remote controller operation is enabled, the air conditioner can be started/stopped from the remote controller.
(The air conditioner responds to the most recently pressed button.)
The remote controller operation enable/disable set from the system controller (Centralized control 1 to 4) is canceled accord-
ing to programmed operations.
Air conditioner
operation
Remote controller
operation
Air conditioner
operation
Remote controller
operation
*1 Whether remote controller operation is enabled or disabled depends on the setting of the
previous day.