Sanyo TRC-5880 - Operation; Stop Mode

OPERATION
The unit employs a slide type mechanism that boasts the following features.
w
. 4-position slide-button control
● sliding F.FWD/EJECT button
. One-touch recording system
● Quick RECORD / quick REVIEW
The operation button ( RECORD/STOP/PLAY/REVIEW ) can be used when a microcassette tape is loaded in the unit.
The EJECT/F.FWD button can be operated when the operation button is in the STOP position.
a. LOADING MICROCASSETTE
The illustration shows the position of the R/P head
and pinch roller when the unit is in eject status.
Load microcassette tape into the unit.
The microcassette detection lever is pressed upon
by the microcassette, releasing the lock.
The mechanism then enters loading (standby) status.
EJECT
h
TAPE GUIDE*
+
RIP HEAD
$
CAPSTAN+(
PINCH ROLLER
MICROCASS13TE (
C!ETECTIONLEVER
I
TAPE GUIDE*
1!
b. STOP MODE
The illustration shows the unit with the operation button
in the STOP position.
The EJECTIF.FWD button can be operated when the unit
is in stop status.
A safety device prevents the EJECT/F.FWD button from
operating when the unit is in other than stop status.
LOAOING MICROCASSEfW
/’
\
l————l————
mlCR0c+v5SETTETAPE
/
E
II
Com
STIY
c1
STOP MODE
PLAv
~’
Rsvtsw
~; -
@
II
FFWD
Uml
EJECT
J
Ill
-1-