SETTINGS
High speed electronic shutter setting
Normally, the speed setting switches for the high speed ES
(electronic shutter) are all set to the OFF position. This sets the
electronic shutter speed to 1/50 sec. The switches can be set as
indicated in table A to select one of the 8 speeds available.
Model VCB-3170P
When using the high speed electronic shutter, the EI/BLC
switch must be set to the OFF position.
The switches can be set as indicated in table A, to select one of
the 8 speeds available.
Model VCB-3100P
The switches can be set as indicated in table A, to select one of
the 5 speeds (1, 5, 6, 7, 8) available.
CAUTION:
• When using the high speed electronic shutter, the EI/BLC
switch (model VCB-3170P) or the EI and BLC switches (model
VCB-3100P) must be set to the OFF position.
• Using the high speed electronic shutter indoors with low
lighting, will give darker pictures. In such a case, add some
lights to make sure the lighting is sufficient. If the lighting is very
bright, pay attention to the light angle in order to avoid or
minimize the smear phenomenon effect.
Table A
1
1/50 sec.
2
1/120 sec.
3
1/250 sec.
4
1/500 sec.
5
1/1000 sec.
6
1/2000 sec.
7
1/4000 sec.
8
1/10000 sec.
ON
123
ON
123
ON
123
ON
123
ON
123
ON
123
ON
123
ON
123
L73M5, N5/XE GB 1996, 10, 31
English 9
To Next Page
Loading...
