Sanyo VCC-4594P - Backlight Compensation Setting

SETTINGS
Backlight compensation setting
This camera has two different backlight
compensation functions: Normally backlight
compensation switch 6 (MULT) and 7 (CENT)
are set to the down (OFF) position. Change
the backlight compensation switch settings
depending on the conditions.
• MULT mode: Use this position when applying backlight
compensation to the whole of the screen.
• CENT mode: Use this position when applying backlight
compensation to only the central portion of the
screen.
Note:
• If switches 6 and 7 are set to the up (ON) position at the same
time, the MULT setting will have priority.
• When MULT mode is set, scenes with no backlighting may appear
extremely dark and the object may appear over-exposed. If this
happens, set to CENT mode.
If using a VIDEO type auto-iris lens
• The ALC volume on the lens should be turned all the way to Av
(Average).
• If the backlight compensation function does not compensate
properly for the conditions, set using the LEVEL volume on the
lens.
6 7
(MULT mode: 64 sections)
(CENT mode)
L53Z4/XE GB 2001, 5, 23
English 13