4
This dome camera can operate on AC24V or DC12V. The camera
automatically transfers the power. When connecting DC12V power
source, check polarity before switching on as a precaution. Wrong
connection may cause malfunction and/or damage to the video
camera.
■
Power supply
■
Operating or storage location
1. Avoid viewing very bright objects, such as light fi ttings for long
extended periods.
2. Avoid operating or storing the unit in the following locations:
● Extremely hot or cold places (operating temperature:-10˚C to
+50˚C).
● Close to sources of strong magnetism.
● Close to sources of powerful electromagnetic radiation, such as
radio’s or TV transmitters.
● In humid and excessively dusty places.
● Where exposed to high mechanical vibrations.
● Close to fl uorescent lamps or objects refl ecting light.
● Under unstable light sources (it may cause fl ickering).
■
Attached the dome casting
Attach the dome casing with the supplied screw fi ttings.
■
Transportation
When transporting the camera, repack in it’s originally packing
or in materials equal in quality.
■
Cleaning
1. The dome cover is the optical part. Use a soft dry cloth to remo-
ve any fi ngerprints or dust.
2. Use a blower to remove dust from the lens.
3. Clean the camera casing with a dry soft cloth. More stubborn
stains, use a cloth dampened with a small quantity of neutral
detergent, then wipe dry.
4. Do not use volatile solvents such as alcohol, benzene or thinners
as they may damage the surface fi nishes
■
Transportation
Pattern attached for localisation camera on wall/ceiling.
NOTES OF USE
To Next Page
Loading...
Need help?
General
