EasyManua.ls Logo

Sanyo VCC-HD5600P - Specifications Overview

Sanyo VCC-HD5600P
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
Specifications
Camera Unit (VCC-MCH5600/MCH5600P)
Image pickup device 1/2.5” CMOS sensor
Effective pixels 16:9 1920 (H) × 1080 (V), 4:3 1600 (H) × 1200 (V)
Lowest image
illumination
50IRE: 2.0 lx (F1.8, in color mode with high gain)
50IRE: 0.1 lx (F1.8 in black-and-white mode with high gain)
Video S/N ratio 50 dB or higher (when AGC is ‘Off’)
Lens Focal Length: 6.3 to 63 mm, F number: F1.8 - 2.5
Optical zoom 10x, electronic zoom 16x (up to 160x when used in
combination with the optical zoom)
Rotational scope Pan: 360° endless pan
Tilt: –20 to +200°
Rotation speed Pan: Max 420°/sec
Tilt: Max 360°/sec (0.1 to 120°/sec during manual operation)
Preset position Max 255
Auto mode Sequential, auto pan, tour, automatic return
Privacy mask ON/OFF, up to 32 positions
Motion sensor ON (detection area setting, video analytics)/OFF, face detection function
Auto pursuit ON/OFF
Sway compensation ON/OFF
Language selection English, French, German, Spanish, Japanese
For further details on the specifications of the camera, refer to the electronic manual.
Power unit (VA-94S)
I/O
Video output Monitor output terminal (BNC)
LAN 10BASE-T/100BASE-TX (RJ-45 connector)
EX-HDD Connector For connecting SANYO-specified external hard disk case (VA-HDC4000)
SD Card Slot 1 (SDHC compliant, max. 32 GB supported)
Alarm input 8 (NO/NC), also serving as Day/Night switching terminal <control
terminal>
Alarm output 2 (NO/NC switching, 16 V, 150 mA, open collector) <control terminal>
Audio input/output Audio input (white: 3.5-mm mini jack)
Audio output (black: 3.5-mm mini jack)
Communication method RS-485
Protocol SSP, PELCO-D
Baud rate 2400, 4800, 9600, 19200
Address 1 - 255 (Sanyo SSP: 1 - 127)
HDMI output: Possible when an HDMI option board (VA-HDB90; sold separately) is attached
Power source
Operating ambient
temperature/humidity
–10 to +50°C/14 to 122°F
90% RH or less (no condensation)
Power source 24 VAC±10%, 50/60 Hz
Power consumption 29 W
L5DD2VA-94SMCH5600PGB.inddSec1:12L5DD2VA-94SMCH5600PGB.inddSec1:12 2009/10/2312:06:332009/10/2312:06:33

Other manuals for Sanyo VCC-HD5600P

Related product manuals