Sanyo VCC-HD5600P - System Connections; Power Connection

5
Connections
VCC-MCH5600
Before attempting the following connections, be sure to turn off all components of your system.
Improper connection may cause smoke or failures. Before attempting to connect each system
component, carefully read the instruction manual that comes with it to familiarize yourself with the
correct connection procedure.
•
•
<Monitor Connection>
<Audio Jack Connection>
<Power Connection>
<Control Terminal Connections>
<Network Connection>
<Installing Recording Media>
󱤨
󱤪
󱤫
󱤩
󱤬
󱤨 Power Connection
This unit is 24 VAC type. Connect the power cable to the power terminal.
Although the power terminals have no polarity, the earth grounding wire must be connected to the
G (earth terminal) terminal.
To prevent a fire hazard use any UL listed wire rated VW-1.
Be sure to use an 18AWG or thicker wire power cable.
AC-ING
■
L5DD2VA-94SMCH5600PGB.inddSec1:5L5DD2VA-94SMCH5600PGB.inddSec1:5 2009/10/2312:06:282009/10/2312:06:28