Sanyo VCC-ZMN600P - Monitor Connection

8
GND
~
~
–
+
4
V
GND
LAN
GND
~
~
–
+
b With AC 24 V
Power Supply Connection
b With DC 12 V
Check that +/- polarity is correct.
For the connections, use cables thicker
than 18 AWG.
For the connections, use cables thicker
than 18 AWG.
Monitor Connection
Digital Video
Recorder etc.
• Using different cables from those
specified here may attenuate the
video and/or sync signals and
interfere with correct transmission.
• RG-59U coaxial cables can be
used when distance between
devices is short, but not in duct or
aerial routing.
Cable type Length
RG-59U (3C-2V)
250 m (273 yds) max.
RG-6U (5C-2V) 500 m (547 yds) max.
RG-11U (7C-2V) 600 m (656 yds) max.
SYNC
CAMERA
LENS
ALARM
PRIVACY MASK
PASSWORD
LANGUAGE
OPTION
y
y
y
y
y
y
y
INT
1
SET
SET
SET
SET
SET
SET
GAMMA
MOTION
POSITION
DAY/NIGHT
PRESET
MENU
y
0.45
OFF
OFF
COLOR
OFF
BACK
D/N SETTING-COLOR
EXT ALARM
1
(ALARM IN 1 or 2)
(COM)
The alarm input terminals can
also be used as terminals for
switching between color and
black/white video modes using
an external switch.
Open: Color
Close: Black/White
Make sure that
COLOR is selected.
1: ALARM IN 1 terminal
2: ALARM IN 2 terminal
Shielded LAN cable
See “Connection when Using PoE Power Supply” or “Connection
when Not Using PoE Power Supply”.
Color or Black-and-White Setting
L5CC2_XE(INSTALLATION).book 8 ページ ２００８年１月２３日 水曜日 午後４時８分