Sanyo VHR-H530 - Child Lock; Ad JUMP TM

CHILD LOCK
With the Child Lock function on, the picture is blanked
and the sound muted, virtually blocking the ability to view
a videotape or TV program received through the VCR
tuner.
1
Press the MENU button.
The main MENU appears.
2
Press the ù (or û) button to select the VCR setup
option, then press the OK button.
The VCR setup menu appears.
3
Press the ù (or û) button to select the Child Lock
option, then press the > (or <) button to select the
“On” position, as indicated by the “z”.
NOTE:
Select the “Off” position to cancel the child
lock function.
4
When finished, press the MENU button to exit the
menu.
While the child lock function is active, the message
“Blocked” will appear on the TV screen.
NOTES:
œ Even when the child lock function is activated, timer
recording and other functions can still operate normally.
œ Since the child lock function can be activated or
deactivated by remote control, you may wish to store
the remote control in a secure location while the child
lock function is activated.
Ad JUMP
TM
The Ad JUMP
TM
feature allows you to skip through to the
end of a commercial break at a faster speed and resume
normal playback at the point when the program restarts.
1
During playback, press the Ad JUMP button when a
commercial starts.
Forward picture search begins.
The sound is muted.
2
Press the Ad JUMP or the PLAY button when the
commercial ends.
The tape will rewind for a few seconds, then
playback will resume.
SC4HW/NA (VHR-H530 GB) Fri. Jan., 07/2000
35