REMOTE CONTROL
Battery Installation and Operation
1
Install the two supplied
AA
batteries as shown.
2
Aim the remote control at the VCR and press the
desired buttons to operate.
IMPORTANT NOTE:
SPENT OR DISCHARGED BATTERIES MUST BE
RECYCLED OR DISPOSED OF IN A SAFE
MANNER IN COMPLIANCE WITH ALL
APPLICABLE LAWS.
FOR DETAILED INFORMATION, CONTACT YOUR
LOCAL COUNTY SOLID WASTE AUTHORITY.
NOTES:
œ The remote control will not operate properly if
something comes between the VCR and the remote
control.
œ This infrared remote control will also control the basic
functions of most Sanyo TVs.
SC4HW/NA (VHR-H530 GB) Fri. Jan., 07/2000
7
To Next Page
Loading...
