71 English
SETTING THE FLASH MODE
3 Select the desired icon from the flash menu, and press the SET
button.
h The selected flash mode is set.
4 Take the picture.
h Still image shooting
→ page 45
CAUTION
Do not touch the flash unit when shooting.
i The flash unit becomes very hot and may cause a burn. Avoid touching the
flash unit when shooting.
HINT
i The flash cannot be used during video clip recording.
i By assigning an operation shortcut to the SET button (page 132), you can
change the flash mode from the Shooting Screen.
Downloaded From VideoCamera-Manual.com Manuals
To Next Page
Loading...
