– 19 –
2. AWB Adjustment
Preparation:
POWER switch: ON
Setting of pattern box:
Color temperature: 3100 ± 20 (K)
Luminance: 900 ± 20 (cd/m
2
)
Adjusting method:
1. When setting the camera in place, set it to an angle so that
nothing appears in any part of the color viewer except the
white section. (Do not enter any light.)
2. Double-click on the DscCalDi.exe.
3. Click the AWB, and click the Yes.
4. AWB adjustment value will appear on the screen.
5. Click the OK.
Adjustment value determination is effectuated using the
"AGC3_ACQ", “AGC3_HMIX30”, “AGC3_HMIX60”, “CHECK",
“CHECK_ND”, “IRIS_GAIN”, “IRIS_OFFSET”, "MS" and “IRIS”
values. If
AGC3_ACQ= a1
AGC3_HMIX30= b1
AGC3_HMIX30=c1
CHECK= wc0, wc1, wc2
CHECK_ND= wnc0, wnc1, wnc2
IRIS_GAIN= g,
IRIS_OFFSET= o,
MS= ms1, ms2, ms3, ms4, ms5
IRIS= s1, s2, s3, s4, s5
the adjustment values fulfill the conditions below, they are de-
termined as within specifications.
Adjustment value determination
1000<=a1<=3000, 1000<=b1<=3000, 1000<=c1<=3000
wc0=128 ± 2, wc1=128 ± 2, wc2=130 ± 40
wnc0=128 ± 2, wnc1=128 ± 2, wnc2=130 ± 40
0<=g<=255
0<=o<=255
1328<ms1<3528, 1289<ms2<3489, 1077<ms3<3277,
463<ms4<2663, 333<ms5<2533
104<=s1<=214, 104<=s2<=214, 104<=s3<=214,
104<=s4<=214, 104<=s5<=214
s1>s2>s3>s4>s5
Adjustment values other than the above are irrelevant.
3. CCD Inter-channel Correlation Adjustment
Camera
Pattern box
Gray chart
(VJ8-0277)
Color
viewer
(VJ8-0007)
cloth
Place the
camera on
its side.
5cm
Gray chart
(VJ8-0277)
Pattern
box
(VJ8-0190)
cloth
Place the
camera on
its side.
5cm
Dsc Calibration x
OK
AWB Results:
1:
AGC3_ACQ=1043
AGC3_HMIX30=1059
AGC3_HMIX60=1043
4F_AGC=65535, 65535,65535
WB=218,512,630
CHECK=128,129,138
WB_ND=225,512,610
CHECK_ND=128,129,135
IRIS_GAIN: 79
IRIS_OFFSET: 166
MS=2183,1795,1720,1312,
1166
IRIS=173,159,143,125,119
0
Fno_FOR_ISO=-1
SS_FOR_ISO=-1
YLEVEL_FOR_ISO=-1
Copy
To Next Page
Loading...
