Sanyo VPC-J2EX - Flicker-Reduction Setting (Video Clip Shooting Only)

English 112
FLICKER-REDUCTION SETTING (VIDEO CLIP SHOOTING ONLY)
The flicker-reduction setting reduces the flicker that results when filming video
clips under fluorescent lights and the like where the background lighting pul-
sates at the frequency of the power supply. The flicker-reduction setting is set
for a frequency of 50 Hz.
1 Set the camera to the video clip shooting mode (see page 41), and
display the EXPERT Mode Shooting Setting Screen (see page 94).
2 Select the desired flicker-reduction
setting from the flicker-reduction
setting menu.
3 Press the SET button.
h This completes the flicker-reduction setting.
HINT
i Note that although the flicker-reduction setting decreases the image flicker
that occurs under fluorescent lighting, the image quality may deteriorate
slightly.
i If the flicker-reduction setting is used outdoors on a very bright day, a hala-
tion effect may occur.
i If the flicker-reduction is set to , then the ISO sensitivity setting (see
page 107) becomes fixed at .
: Turns off the flicker-reduction set-
ting.
: Turns on the flicker-reduction set-
ting.
FLICKER REDUCT
OFF
Camera_EN.book Page 112 Sunday, August 31, 2003 3:48 PM