Sanyo VPC-J2EX - Page 189

English 186
Problem Cause Action
Reference
page
Shooting
The add voice
memo setting
turned off.
An image was
captured with a
voice memo
added.
Set the add
voice memo
function to ON
again.
111
During video
clip shooting,
the zoom
movement
stops
momentarily.
The optical
zoom has
moved to the
maximum
magnification
position.
Not a
malfunction.
Release the
zoom switch,
and press it
again.
67, 108
A voice memo
cannot be
added.
The camera is
set to a mode
other than the
still image
shooting
mode.
Set the camera
to the still
image
shooting
mode.
41
There is noise
in the captured
image.
The ISO
sensitivity
setting is too
high.
Set the ISO
sensitivity to a
lower setting.
107
The motion
alert icon is
shown on the
LCD display.
The shutter
speed is slow.
Stabilize the
camera with a
tripod or the
like.
31
LCD
monitor
When
capturing an
image, no
image is
displayed on
the LCD
monitor.
The selector
dial is not set
to [ ].
Set the
selector dial to
[].
41
No playback
image
appears.
The selector
dial is not set
to [ ].
Set the
selector dial to
[].
72
Camera_EN.book Page 186 Sunday, August 31, 2003 3:48 PM