35 English
OTHER SHOOTING FUNCTIONS
2 Press the flash button [] ([n]) to select the flash mode.
h Each time the flash button is pressed, the flash mode icon changes.
3 Press the shutter release button.
h The image is captured in the desired flash mode.
<Shooting without using the LCD monitor>
1 Press the flash button.
h The LCD monitor turns on briefly to show the currently set flash
mode.
2 Press the flash button within 5 seconds to set the desired flash mode.
NOTE
In the automatic flash mode...
i In the automatic flash mode using the LCD monitor, when the shutter
release button is depressed halfway, a icon appearing in the upper
right area of the LCD monitor indicates that the flash will operate.
Flash button Flash
To Next Page
Loading...
