EasyManua.ls Logo

Sanyo VPC-X1200 - Page 65

Sanyo VPC-X1200
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English 56
Lens 3.0× optical
zoom lens
f=6.3 mm to 18.9 mm
(35 mm film camera
conversion: 35 mm to
105 mm)
Autofocus, 5 groups,
6 elements (4 with aspheric
surfaces)
Aperture Open F=3.1 (Wide) to 5.9 (Tele)
Exposure control type Programmable AE
Exposure correction available from the
Recording Menu (0±1.8EV in 0.3EV steps)
Light-measuring modes Multi-section measuring, center-weighted
measuring, spot measuring
Range Normal photography: 10 cm (3.94 in.) to
(Wide), 60 cm (23.62 in.) to (Tele)
Macro photography: 5 cm (1.97 in.) to 80 cm
(31.50 in.) (Wide), 60 cm (23.62 in.) to 80 cm
(31.50 in.) (Tele)
Digital zoom For shooting: 1× to 4×
For playback: 1× to 62.5× (varies with resolution)
Shutter speed Single-shot mode: 1/2 to 1/1,500 sec.
(Maximum approx. 2 seconds when the
scene function is set to fireworks Hetc.)
(During flash: 1/30 to 1/1,500 sec.)
Sequential shots mode:
1/2 to 1/1,500 sec.
Video clip recording mode:
1/30 to 1/2,500 sec.
Sensitivity (standard
output sensitivity)
Single-shot mode/sequential shots mode
(standard output sensitivity):
Auto (ISO64 to 400)/ISO64, ISO100,
ISO200, ISO400, ISO800, ISO1600, and
ISO3200 (switchable from Recording Menu)
Video clip recording mode:
Auto (ISO384 to 2400)/ISO384, ISO600,
ISO1200, ISO2400, ISO4800
(switchable from Recording Menu)
* Sensitivity measured in compliance with
the ISO standard (ISO 12232:2006).

Table of Contents

Related product manuals