Sanyo VSP-9000 - DVR Playback and Recording Functions

English
33 Operation
Hard Disk Digital Recorder (DVR) Operation (Continued)
4
Press .
changes to .
5
Use the ten-key pad to enter the
camera address (Example: 2).
The Datum “00002” will flash.
6
Press the button.
The Datum changes to “00000”, and the
camera input channel in the message
display is “2”.
Press the button to return to the
Main Menu screen.
7
Switch between the sub
screen ( button) and the
Main Menu screen (
button), and operate the
recorder or the camera.
b
bb
b Main Menu Screen Operation
Alarm button
Press this during playback or during a
pause. The previous alarm is played
back.
Playback button
The normal recording area or alarm
recording area is played back.
Alarm button
Press this during playback or during a
pause. The next alarm is played back.
Recording button
The recording confirmation screen is
displayed on the menu display.
Press to cancel recording, or
press to record.
Four-screen display button
The main monitor displays a
four-pane screen.
Reverse playback button
Playback speed down button
Press this during playback. This
begins frame advance reverse still
images ( ). Press repeatedly to
decrease the frame speed.
Playback speed up button
Press this during playback. This
begins frame advance forward still
images ( ). Press repeatedly to
increase the frame speed.
DVR
esc
del
t
123
456
78
0
9
Datum: 00000
00000
00000
Accept.values
Max 00100
00100
Min 00001
00001
DVR
esc
123
46
Datum: 00002
00002
00000
00100
00001
enter
esc
esc
del
enter
123
456
78
.
0
9
Datum: 00000
00000
00000
Accept.values
Max 00100
00100
Min 00001
00001
Digit
Camera nr.
CAM 2 DVR 1
CAM 2 DVR 1
DVR
Esc to exit
Esc to exit
TO SUB
SCREEN
TO MAIN
SCREEN
ALARM
PLAY
ALARM
REC
esc
enter
esc
enter
REC OK?
NO: esc
OK: enter
CAM 2 DVR 1
CAM 2 DVR 1
R PLAY
PLAY
SPEED
PLAY
SPEED