English
89 Others
Appendix
(Continued)
b
bb
b Special Code Chart
These functions can be loaded by entering their special codes.
ERNITEC SATURN............................................ 89
MARK MERCER ................................................ 90
PELCO .............................................................. 92
SENSORMATIC................................................. 94
b
bb
b
ERNITEC SATURN
Code Function
AUTOPAN
301 Saves the current position of the first limit switch.
302 Saves the current position of the second limit switch.
XXX XXX= 0 – 255: Auto-pan speed (0=min, 255=max)
Note: Cannot use with Saturn type.
PATROL
1000 Deletes patrol order.
1XXX XXX= 1– 128: Writes preset position “XXX” into patrol order.
2000
2XXX
Makes patrol order valid.
X= 001 – 128: Deletes preset position “XXX” from patrol order.
3XXX X= 000 – 255: Waiting time (in seconds) upon reaching specified position
Example:
“1000” Deletes previously defined order.
“1001” Writes preset position “1” into order.
“1005” Writes preset position “5” into order.
“1006” Writes preset position “6” into order.
“2005” Deletes preset position “5”.
OTHER FUNCTIONS
4XXY Dome cameras can be set to automatically move to the "return position" after a
set stopping time passes.
XX= 01 – 99: “Return position” (Cannot select positions No. 100 to No. 128)
Y= 0 – 9: Return time
0: 10 seconds, 1: 20 seconds, 2: 30 seconds, 3: 40 seconds, 4: 1 minute,
5: 2 minutes, 6: 5 minutes, 7: 10 minutes, 8: 20 minutes, 9: 40 minutes
4000 Invalidates movement to “return position”.
Example:
“4216”: After stopping for 5 minutes (Y=6), move to position 21 (XX=21).
400 Text display/non-display (switch)
500 Backlight compensation ON/OFF (switch)
9999 Initializes the dome camera internal memory.
To Next Page
Loading...