Sanyo VSP-9000 - Touch Screen Adjustment (TOUCH SCREEN SETTING)

English
55 System Setup
Setup (CONFIGURATION) (Continued)
b
bb
b Touch screen adjustment
(TOUCH SCREEN SETTING)
1
Press the button or
button to select “TOUCH
SCREEN SETTING”, then
press the button.
The adjustment screen appears.
2
Press the center of the
button at the upper left to
display the pressed
coordinates.
The “*****” changes to coordinates
(numerical value).
The coordinates are fixed.
Setting value guideline:
• Top line coordinate range: 300 – 600
• Bottom line coordinate range: 3400 – 3600
3
Press the button.
The coordinates at the upper left are
placed in memory, and change to
“= = = = =”.
4
Press the button.
The button at the upper left moves
to the lower right.
5
Press the center of the
button to display the pressed
coordinates.
The “*****” changes to coordinates
(numerical value).
The coordinates are fixed.
Setting value guideline:
• Top line coordinate range: 3400 – 3600
• Bottom line coordinate range: 500 – 1000
enter
Enter
Enter
ESC
ESC
*****
*****
00425
03590
Enter
Enter
ESC
ESC
Value when pressed Current adjustment value
00398
03516
00524
03539
enter
Enter
Enter
ESC
ESC
-----
-----
00524
03539
Enter
Enter
ESC
ESC
*****
*****
03604
00773