Sanyo VSP-9000 - Touch Screen Test (TOUCH TEST)

English
57 System Setup
Setup (CONFIGURATION) (Continued)
5
After initializing, operate the
joystick as shown in the
drawing to perform touch
screen adjustment.
The touch screen adjustment screen appears.
Perform settings using the procedure on P55.
After setup is complete, the “DOWNLOAD
MODE” screen is displayed. Turn the
dipswitch (SW1) OFF.
b
bb
b Touch screen test
(TOUCH TEST)
1
Press the button or
button to select “TOUCH
TEST”, then press the
button.
The testing screen appears.
2
Press the boxes on the test
screen.
is displayed in the pressed boxes.
Press all the boxes to check them.
3
Hold down the upper right box
to return to the
“CONFIGURATION” screen.
1
2
Enter
Enter
ESC
ESC
-----
-----
00524
03539
ent
Keep your finger here to exit to
the menu.