English
65 Software
System Setup (Setup)
(Continued)
Changing the Camera Address
Number
• Click to enter input/output settings
mode (upper left grid displays “Addr.”).
To set a camera address, double-click it
and enter the number.
• To change the address of a camera
connected to another hard disk digital
recorder or multiplexer (Dvr/Mux), use the
spin button to change the Dvr/Mux address.
4
Make the various selections.
• To make other settings, switch using
the tabs and continue operation.
• To save settings in the PC, on the “File”
menu select “Save”.
• When selecting “Send to keyboard” on
the “File” menu, the system setup
content is uploaded to the unit.
To Next Page
Loading...