Sanyo Xacti VPC-503 - Page 50

EN-50
4. Use the four-way controller (ST) to select by your preference, then
press the button.
[Quantity]: Allows you to select image quantity (0~10). Use the
four-way controller (WX) to set the image quantity.
[Date]: The date of recording can be printed directly on the images.
Select [Yes] or [No] with the four-way controller (WX).
5. Press the MENU button to return to the image playback mode.
 The print icon is marked on the displayed image.
 To cancel the DPOF settings for a single image, go back to step 3
to select [One Image] and select 0 in [Quantity] in the next step.
For resetting all the DPOF settings, go back to step 3 to select
[Reset All].
 Before you perform the DPOF settings on your camera, always remember to copy
your images from the internal memory to an SD memory card first.
 The
print icon will appear on the LCD monitor screen indicating images
selected for printing.
 You cannot print movies.
 Depending on the printer or printing equipment at the photo processing lab., the
date may not be imprinted on the pictures even if the DPOF settings are made.
Yes
Yes
1
1
One Im
One Image
One Image
Select :
Select :
Select :
Quantity
Quantity
Quantity
Date
Date
Cancel : MENU
Cancel : MENU
Cancel : MENU
One Im
One Image
One Image
Yes
Yes
0
0
Select :
Select :
Select :
Quantity
Quantity
Quantity
Date
Date
Cancel : MENU
Cancel : MENU
Cancel : MENU
100-0001
100-0001
100-0001
R
eset Al
eset All
Reset All
DPOF
DPOF
Select :
Select :
Select :
One Im
One Image
One Image
All Im
All Ima
ge
ges
DPOF
All Images
Cancel : MENU
Cancel : MENU
Cancel : MENU