EN-67
Mode2 settings
Item Functional Description
Metering You can select the metering mode that sets which part of the subject to measure to
determine the exposure.
Center-weighted: Averages the light metered from the entire frame, but gives greater
wieght to the subject matter at the center.
Spot: The exposure is determined by the small area in the center of the screen only.
Digital Zoom This sets whether or not to use digital zoom at the time of shooting. Refer to the section in
this manual titled “Using the Zoom Function” (EN-27)
for further details.
Quick View Set to display a photographed image on LCD monitor screen immediately after you have
taken the shot.
To Next Page
Loading...
