▲
▲
▲
STEP 4
DELETING IMAGES
Did your photos turn out the way you hoped?
Even if you make a mistake, it’s easy to delete the pictures you aren’t
satisfi ed with. Unlike fi lm cameras, with a dual camera you can take
all the photos you want, keep the ones you like and delete the rest.
Display the fi le that
you want to delete.
Press [].
The Confi rm
Delete Screen
appears.
Select “DELETE”,
and press the SET
button.
The current image
is deleted.
To return to the
Playback Screen,
select “EXIT”, and
press the SET
button.
1
2
COPYING FILES TO A COMPUTER
3
Start your computer, and use the supplied USB
interface cable to connect your camera to the
computer.
Connect the camera’s USB/AV terminal to the
computer’s USB connector.
The USB Connection Screen appears on the
camera’s monitor.
Select “COMPUTER”, and press the SET button.
The screen to select the connection mode
appears.
Select “CARD READER”, and press the SET
button.
Select an action.
Select the desired procedure.
Copy the desired camera fi le(s) to the computer.
1
2
3
CAUTION
To access the data in the camera’s internal memory...
Remove the card from the camera.
INSERT THE CARD
A card is not included with your camera. Please
purchase a commercially sold card.
3Close the card
slot cover.
1Open the card slot cover.
4
5
2Insert the card.
PREPARE THE BATTERY PACK
Use the supplied charger to charge the battery
pack.
Charge the battery pack
The CHARGE indicator shows the battery pack charge status.
Lights red during recharging.
Turns off when battery pack is fully charged.
The charging time is approx. 120 minutes.
Battery pack
Connector markings
Raise
CHARGE
indicator
Power cord
Insert the battery pack
2Open
4Close
3Insert1Push out
To Previous Page
Loading...
