EasyManua.ls Logo

Sanyo Xacti VPC-S120 - Page 69

Sanyo Xacti VPC-S120
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English 58
Lens 3.0× optical
zoom lens
f=6.3 mm to 18.9 mm
(35 mm film camera
conversion: 35 mm to
105 mm)
Autofocus, 5 groups,
6 elements (4 with aspheric
surfaces)
Aperture Open F=3.1 (Wide) to 5.9 (Tele)
Exposure control type Programmable AE
Exposure correction available from the
Recording Menu (0±1.8EV in 0.3EV steps)
Light-measuring modes Multi-section measuring, center-weighted
measuring, spot measuring
Range Normal photography: 10 cm (3.94 in.) to
(Wide), 60 cm (23.62 in.) to (Tele)
Macro photography: 5 cm (1.97 in.) to 80 cm
(31.50 in.) (Wide), 60 cm (23.62 in.) to 80 cm
(31.50 in.) (Tele)
Digital zoom For shooting: 1× to 4×
For playback: 1× to 62.5× (varies with resolution)
Shutter speed Single-shot mode: 1/2 to 1/1,500 sec.
(Approx. 2 sec. max. when scene select
function is set to fireworks H etc.)
(During flash: 1/30 to 1/1,500 sec.)
Sequential shots mode:
1/2 to 1/1,500 sec.
Video clip recording mode:
1/30 to 1/5,000 sec.
Sensitivity (standard
output sensitivity)
Single-shot mode/sequential shots mode
(standard output sensitivity):
Auto (ISO 64 to 400)/ISO 64, ISO 100,
ISO 200, ISO 400, ISO 800, ISO 1600,
ISO 3200, and ISO 6400 (switchable from
Recording Menu)
Video clip recording mode:
Auto (ISO 384 to 2400)
hSensitivity measured in compliance with
the ISO standard (ISO 12232:2006).

Table of Contents

Related product manuals