Sanyo Xacti VPC-S500 - Page 65

EN-65
 In [Print All] Mode: Lets you print all images with PictBridge.
 In [Print With DPOF] Mode: This function only lets you print the specified image
based on the previous DPOF settings.
6
This starts printing and displays the message
“Transferring” on the LCD monitor screen.The message
will disappear after the printing is finished. Then the
screen returns to [Printing Mode Select].
 To cancel printing:
Pressing the button during print data transfer displays
the screen for selecting whether to [Continue] or [Cancel]
printing.
Step Figure Procedure
1
If you wish to print all the images stored in the camera,
you may choose [Print All] in [Printing Mode Select].
2
To set Print Settings, follow steps 2 to 6 in [Print] Mode.
Step Figure Procedure
1
If you wish to print images with DPOF setting, you may
choose [Print With DPOF] in [Printing Mode Select].
2
To set Print Settings, follow steps 2 to 6 in [Print] Mode.
• When connecting a printer which is not compatible with DPOF, [Print With DPOF]
cannot be selected.
Step Figure Procedure
Cancel :
Cancel :
Cancel :
1/3
1 / 3
T r
ans
a n s f e r
rin
r i n g
1/3
Transferring
Print
Print
OK :
OK :
OK :
Continue
Continue
Cancel
Cancel
Continue
Cancel
Print
Printing Mode Select
Printing Mode Select
Printing Mode Select
OK :
OK :
OK :
Print
Print
Print All
Print All
Print
Print All
Print
Print W
ith DPO
ith DPOF
Print With DPOF
Printing Mode Select
Printing Mode Select
Printing Mode Select
OK :
OK :
OK :
Print
Print
Print All
Print All
Print
Print W
ith DPO
ith DPOF
Print
Print With DPOF
Print All